| 9. |
All finished soffits for radius racking. (See figure 5 below)
(Figure 5)
|
| 10. |
All walls and ceilings must have a 6 mil minimum vapor barrier "on the warm side" of the walls and ceilings. |
| 11. |
All walls must be insulated with a minimum of R-13 regardless of existing conditions. |
| 12. |
All ceilings must be insulated with a minimum of R-19 regardless of existing conditions. |
| 13. |
Ideally, 1/2" plywood sheeting will be secured to all walls after electrical rough in and insulation to anchor racking. (This step not needed if using nailers between studs. See Figure 3 on page 4). |
|
|
Find out more about our worldwide factory direct installations.
|
|
