* Installation is simple and does not require a HVAC technician.		These wine refrigeration units are ideal for your entry level wine cellar. The benefits of the wine refrigeration units are: They are self-contained and therefore do not require a HVAC technician for installation. Mounting the Breezaire in your wine cellar requires only a hole cut in the wall large enough to accept the wine refrigeration unit, and then a platform for the unit to sit on. Will maintain the required 55 - 58 degree temperature for a wine cellar. Designed to maintain the humidity between 55 - 75%. Vibration free. Plugs into a standard 110 Volt outlet.
Requires a drain line. Does not introduce humidity into the space, it only maintains the existing level. Standard unit does not have an electronic readout, you will need to purchase a thermometer separately or upgrade to the "E" series. Must vent into an adjoining space in your home with a temperature no greater than 25 degrees higher than the wine cellar (i.e. a 55 degree temperature in the wine cellar means the unit must vent into a space no more than 80 degrees.) As with any cooling unit the space the unit is venting into needs to be a minimum of twice the size of the wine cellar. The plug for these wine refrigeration units are in the front, so you normally have to pull the cord through the wall to plug it in, unless you pay an upgrade to have the cord put in the back of the unit.        Model #     BTU     Indoor Condenser       WK1060   1060       WK2200   2200       WK3000   3000       WK4000   4000       WK6000   6000       WK8000   8000